How we calculate this
Your household starts with a 10 Mbps baseline for background traffic — updates, sync, telemetry. Each answer then adds the peak bandwidth that activity needs while it is actually running.
The sum is your peak simultaneous demand. Because households do not schedule their usage neatly, we add 30% headroom and round up to the nearest speed providers actually sell.
Upload is estimated separately from video calls, cloud backups, cameras and creator work, using its own formula, because cable and DSL plans often pair a large download number with a fraction of the upload, while fibre is usually symmetric.
- 100/20 Mbps — the FCC broadband benchmark since 2024.
- 564 Mbps average US household peak downstream, with 34 Mbps up (OpenVault, Q1 2025).
- 17–21 connected devices in a typical US home (Parks Associates).
How much speed each activity uses
| Activity | Download | Upload | Notes |
|---|---|---|---|
| Web browsing and email | 5 Mbps | 1 Mbps | Latency matters more than speed |
| Music streaming | 1 Mbps | — | Negligible across several devices |
| HD video streaming | 8 Mbps | — | Per stream at 1080p |
| 4K video streaming | 25 Mbps | — | Per stream; HDR pushes higher |
| Video call, one to one | 4 Mbps | 4 Mbps | Upload is the limiting side |
| Group call with screen share | 8 Mbps | 8 Mbps | Two at once doubles both |
| Console or PC gaming | 5 Mbps | 1 Mbps | Needs low latency, not high speed |
| Cloud gaming | 35 Mbps | 2 Mbps | Sustained and sensitive to jitter |
| Cloud backup or large upload | — | 25 Mbps | Will saturate a slow upload link |
| Livestreaming at 1080p | — | 10 Mbps | Stability matters as much as speed |
| Security camera, continuous | — | 3 Mbps | Per camera, uploading to cloud |
| Smart home device, idle | 0.1 Mbps | 0.1 Mbps | Adds Wi-Fi airtime more than load |
Common questions
How many Mbps does my household need?
Most homes land between 100 and 500 Mbps. The driver is not headcount but how many bandwidth-heavy things run at once — one 4K stream plus two video calls asks more of a connection than ten phones browsing. Roughly 25 to 50 Mbps per actively used device is a reasonable rule of thumb.
What is the FCC minimum broadband speed?
100 Mbps download and 20 Mbps upload, raised in 2024 from the 25/3 Mbps standard set in 2015. It is household-level policy context used for deployment assessments and programmes like BEAD — a floor, not a recommendation.
Why does upload speed matter?
Video calls, cloud backups, security cameras and livestreams all push data outward, and upload is where a shared line usually gives out first. Cable and DSL plans often pair a large download figure with a fraction of the upload; fibre is normally symmetric. Check both numbers before comparing plans.
Does the number of devices matter?
US homes now average 17 to 21 connected devices, but only the ones actively transferring data consume bandwidth. A smart thermostat may use as little as 100 KB an hour; ten or more devices running firmware updates and cloud sync together is a different matter, and they also compete for Wi-Fi airtime — often the real bottleneck rather than the plan.
Is a gigabit plan overkill?
For most households today, yes — until 8K streaming, multi-user creator workflows or local AI workloads become normal. Once the plan covers your peak hour comfortably, extra download speed does nothing for page loads or call quality.
Why does the calculator ask when my usage peaks?
Shared connections slow down when a whole neighbourhood is online, typically between 8pm and 11pm. Households whose heaviest use falls in that window get extra headroom in the recommendation.
Glossary
Mbps — Megabits per second. Eight megabits make one megabyte, so a 100 Mbps line pulls about 12.5 MB each second.
Latency — The delay before data starts moving, in milliseconds. It decides how responsive calls and games feel.
Headroom — Spare capacity above your calculated peak, so one unexpected download does not interrupt everything else.
Symmetric connection — A plan whose upload matches its download. Normal on fibre, rare on cable and DSL.
Peak hour — The window when your household and your neighbourhood are both online, usually 8pm to 11pm.
Jitter — Variation in latency. Steady 30 ms beats an average of 20 ms that spikes, especially for calls and cloud gaming.
Related tools and guides
Run a speed test — Measure what actually reaches your router before you change plans.
Compare providers by ZIP — Every plan serviceable at your address, with real upload figures.
Wi-Fi coverage checker — Work out whether the plan or the router is the bottleneck.
Data usage calculator — Estimate monthly gigabytes and check them against any data cap.
Upload speed guide — Why remote workers and creators feel a slow line the hardest.
Latency and gaming guide — What ping, jitter and packet loss do to a competitive match.